Vehicle connectivity.

Cellular routers for onboard IP equipment and serial devices. Select the hardware configuration, then validate it in your vehicle system.

Product lineup

Three documented series. Exact radio and interface configurations remain model-specific.

Connect onboard equipment to your operating system.

Choose the cellular configuration

Compare documented 4G / 5G variants and cellular module options against destination-country networks. SIM count and failover behavior must be fixed per model.

CM520-6XX / 8A / 8V →

Bring IP and serial equipment together

CM520-61 and CM520-64 list one Gigabit WAN, four Gigabit LAN ports and RS232. Match cameras, terminals and controllers to the exact interface layout.

CM520-61 / CM520-64 →

Select positioning where needed

The 8A selection guide lists GPS / BeiDou; 8V does not list positioning. Validate antennas, mounting and vehicle power protection during OEM evaluation.

CM520-8A / 8V →

Options depend on the ordered hardware and firmware. Contact us to confirm configuration-specific requirements.

Vehicle router series comparison
Engineering criterionCM520-8VX / 8AXCM520-61CM520-64
Cellular network4G and 5G variants listed; country bands and carrier approval require confirmationConfiguration-dependent; select the exact 6XX code and regional moduleConfiguration-dependent; select the exact 6XX code and regional module
Ethernet / serialTo confirmConfirmation required — overview states 2 ports; table lists a WAN port and 4 LAN ports; 1 × RS2321 × Gigabit WAN port; 4 × Gigabit LAN ports; 1 × RS2321 × Gigabit WAN port; 4 × Gigabit LAN ports; 1 × RS232
Wi-FiSupported; band, standard and antenna configuration require confirmationReview the exact 6XX configuration; do not assume a common Wi-Fi radioReview the exact 6XX configuration; do not assume a common Wi-Fi radio
GNSSGPS / BeiDou available on 8A variants; not listed for 8V variantsConfiguration-dependent; verify module and antennaConfiguration-dependent; verify module and antenna
Power inputTo confirmConfirmation required — published voltage text is malformed6–32 V DC6–32 V DC
VPNFunctionality listed by manufacturer; protocol and firmware require confirmationValidate VPN protocol and firmware using the 6X manual and ordered sampleValidate VPN protocol and firmware using the 6X manual and ordered sample
Remote managementTo confirmRemote-management support listed in the translated sheet; API, batch operations and platform scope: Confirmation requiredTo confirmPlatform, API, provisioning and fleet-operation scope: Confirmation requiredTo confirmPlatform, API, provisioning and fleet-operation scope: Confirmation required
Certification / vehicle qualificationTo confirmConfirmation required — no model-specific automotive certificate reviewedTo confirmConfirmation required — request model-specific reports and destination-market approvalsTo confirmConfirmation required — request model-specific reports and destination-market approvals

Confirm the supply voltage and vehicle power protection requirements for your ordered configuration.

Applications & integration

PLC and sensors via a compatible acquisition module connect through an industrial cellular router and 4G or 5G network to a customer SCADA or remote control center. A configured VPN connects the router and the customer VPN endpoint; arrows distinguish equipment data and authorized return traffic. The product photo is a CM520-8A / 8V catalog example. The product photo is a CM520-8A / 8V catalog example. The product photo is a CM520-8A / 8V catalog example.

Illustrative architecture. Sensors may require a PLC or acquisition module. Interface and cellular options depend on the selected model. VPN protocol, authentication and access policy require firmware-specific configuration; SCADA compatibility and control logic belong to the customer system.

Review CM520-8A / 8V specifications →

Onboard surveillance

Map camera bandwidth and Ethernet port needs. PoE supply and recorder integration must be specified separately.

Fleet telematics

Match serial signals, GNSS option and customer-server protocol. Validate antennas and recovery behavior in the intended vehicle.

Vehicle OEM integration

Review mounting, harness, ignition behavior, transient protection and certificates. Sample approval should cover the actual hardware and firmware.

Explore the vehicle integration scenario →

Engineering resources

Technical document center →

Match the exact model and document revision before procurement.

CM520-8A / 8V — Vehicle Wi-Fi router family

Product sheet · PDF · 0.4 MB

Source revision: not stated · Technical review edition

Download PDF

CM520-6X Series — Vehicle router — installation and configuration manual

User manual · PDF · 7.0 MB

Source manual V1.2 | source date 2020-01-22 (as printed) · Technical review edition

Download PDF

CM520-6XX Series — Vehicle cellular and Wi-Fi router — technical specifications

Product sheet · PDF · 0.4 MB

Source V1.1 | filename date 20260522 · Technical review edition

Download PDF

Download CM520-8A / 8V series technical specifications — Chinese original

Firmware

Request firmware for your hardware revision and the corresponding upgrade procedure.

Request this resource →

Certification

Request the applicable market approvals and vehicle-test reports for your model.

Request this resource →

Integration guide

Use the 6X manual for installation and configuration. Contact us for vehicle wiring and platform integration requirements.

Request this resource →

Evaluate the right vehicle configuration.

Send destination country, required interfaces, SIM / modem architecture, vehicle supply and estimated volume. Private-label and hardware adaptation are evaluated per project.

Discuss your requirements →