Industrial connectivity · Remote monitoring · Edge computingInternational
CAIMORE

Water & environmental monitoring

Bring remote measurements into your operational view.

Build a monitoring architecture around field sensors, telemetry hardware and your data platform.

Acquire field signals. Control local outputs.

Connect external sensors

CM550-21F lists eight analog inputs, SDI-12 and a rain-gauge interface. Select compatible level, liquid-level or environmental sensors and validate signal ranges.

CM550-21F →

Go beyond telemetry

CM550-52 lists eight digital inputs, two PWM outputs and four relay outputs. Verify output ratings, interlocks and control logic with the ordered revision.

CM550-52X →

Fit the monitoring system

CM550-21F lists remote parameter configuration, upgrade and restart. Confirm Modbus role, firmware and SCADA integration; sensors and dashboards are separate system elements.

CM550-21F technical specifications →

Typical system connection

Typical system connectionField equipment: External level / environmental sensors. Next connection: Analog / SDI-12 / serial · per model. CAIMORE device: CM550 RTU. Product range example Next connection: Cellular or Ethernet · per model. Customer system: Customer SCADA / monitoring platform. Server hardware example01 / FIELD EQUIPMENTExternal level /environmental sensorsAnalog / SDI-12 / serial · per model02 / CAIMORE DEVICECM550 RTUCAIMORE product category exampleProduct range exampleCellular or Ethernet · per model03 / CUSTOMER SYSTEMCustomer SCADA / monitoringplatformServer hardware example, not a customer platform screenshotServer hardware exampleTypical system connectionField equipment: External level / environmental sensors. Next connection: Analog / SDI-12 / serial · per model. CAIMORE device: CM550 RTU. Product range example Next connection: Cellular or Ethernet · per model. Customer system: Customer SCADA / monitoring platform. Server hardware example01 / FIELD EQUIPMENTExternal level / environmentalsensorsAnalog / SDI-12 / serial · per model02 / CAIMORE DEVICECM550 RTUCAIMORE product category exampleProduct range exampleCellular or Ethernet · per model03 / CUSTOMER SYSTEMCustomer SCADA / monitoringplatformServer hardware example, not a customer platform screenshotServer hardware example

Local branch: an RTU control output connects through a correctly rated interface to field equipment. PWM and relay outputs are model-specific; field safety and actuator engineering remain project responsibilities.

Photos show equipment categories, not a delivered installation. Camera: Geezertd, public domain. Servers: Abigor, CC BY-SA 3.0, unmodified.

Integration architecture

Three layers. Clear responsibilities.

Illustrative integration architecture. Sensors, application software and engineering services are separate from the listed hardware unless explicitly agreed.

01 / Integration layer

Field measurements

Select and calibrate external level, rainfall, flow or environmental sensors. Confirm signal ranges, power and field protection.

02 / Integration layer

Acquisition & telemetry

Evaluate CM550-21F or CM550-52X for signal acquisition, local functions and cellular communications. Match the I/O and protocol configuration to the instruments.

03 / Integration layer

Monitoring & response

Integrate readings into your SCADA or monitoring software. Alarm thresholds, dashboards and early warning require platform engineering and operational procedures.

Technical evaluation

Questions to resolve together.

  • Sensor signals, SDI-12/serial requirements and acquisition intervals
  • Modbus role, firmware options and SCADA interoperability
  • MQTT, remote configuration and device management availability
  • Field power, backup communications and site acceptance testing

Confirm model-specific capabilities and installation requirements with our technical team.

Hardware to evaluate

Explore the relevant platforms.

CM550-21F

Water & hydrological monitoring RTU

A remote terminal unit combining sensor acquisition, local data storage, remote control and communications for water and environmental monitoring projects.

  • SDI-12 and rainfall sensor interfaces
  • 8 analog inputs
  • Remote configuration listed
View details

CM550-52X

General-purpose cellular RTU

Integrated analog and digital acquisition, remote control and cellular communications for distributed monitoring installations. Interface and radio configuration must be matched to the selected variant.

  • Analog and digital signal acquisition
  • RS232 and RS485 interfaces
  • Pulse counting
View details

Start with your application

Discuss your industrial
IoT project.

Tell us your application, required interfaces, connectivity specifications and estimated project volume.

Send an inquiry