CM510-11X Series — Industrial cellular data transfer unit
Source revision not stated · Technical review edition · PDF
CAIMORECM510-11X
Industrial cellular data terminal
An industrial cellular data terminal with 5G/4G configurations listed by CAIMORE. Configurable serial communications connect legacy equipment to a cellular data link.
- Serial rate
- 110–115200 bit/s
- Serial flow control
- None, RTS/CTS hardware, or XON/XOFF software flow control
- DC input
- 7–32 V DC
- Operating temperature
- −30 to +75 °C
Product photography. Open full image ↗
Technical specifications
Options vary by model, hardware revision and firmware.
Key specifications
| Serial rate | 110–115200 bit/s |
|---|---|
| Serial flow control | None, RTS/CTS hardware, or XON/XOFF software flow control |
| DC input | 7–32 V DC |
| Operating temperature | −30 to +75 °C |
Source model table
CM510-11X Series — Industrial cellular data transfer unit · Source revision not stated · Source pp. 1-2
| CM510-11F | Connection: RS232 DB9; Network: Seven-mode cellular; RS232: Yes; RS485: No; TTL: No; Buffer: 8K |
|---|---|
| CM510-11T | Connection: RS232 DB9; Network: 4G/GSM; RS232: Yes; RS485: No; TTL: No; Buffer: 8K |
Pin definitions
CM510-11X Series — Industrial cellular data transfer unit · Source revision not stated · Source pp. 4-5
| 1 | Signal: Online; Function: Optional output: +5 V connected to center, -5 V disconnected; specify when ordering. |
|---|---|
| 2 | Signal: RX; Function: RS232 input, PC to DTU. |
| 3 | Signal: TX; Function: RS232 output, DTU to PC. |
| 4 / 6 / 8 / 9 | Signal: NC; Function: Unused. |
| 5 | Signal: GND; Function: RS232 ground. |
| 7 | Signal: SW; Function: Optional new-version enable: -10 to 0 V or floating ON; 3.3-30 V OFF. Input range -10 to +30 V; confirm order and revision. |
Serial and peripheral interfaces
CM510-11X Series — Industrial cellular data transfer unit · Source revision not stated · Source pp. 4-6
| Serial | RS232. 8 data bits; 1/2 stop bits; 110-115200 bit/s; none/odd/even/SPACE/MARK parity; no flow control, RTS/CTS hardware flow or XON/XOFF software flow. |
|---|---|
| Indicators | POWER, ACT and Online. |
| Antenna | SMA female, 50 ohm; optional 3/5/10/15 m extension cables. |
| SIM | 1.8/3/5 V push-type card interface; 15 kV ESD protection. |
| Power connector | Standard 3-pin locomotive-style power socket, as described. Confirm actual connector with hardware. |
Radio bands and performance
CM510-11X Series — Industrial cellular data transfer unit · Source revision not stated · Source pp. 4-6
| LTE FDD | B1/B3 |
|---|---|
| LTE TDD | B39/B40/B41 |
| Legacy modes | TD-SCDMA B34/B39; WCDMA B1; CDMA2000 1X/EVDO B5. These three groups are not supported by the T variants in the source. GSM/GPRS/EDGE B3/B8. |
| Power classes | Class 4: 2 W at 850/900 MHz; Class 1: 1 W at 1800/1900 MHz. EGSM900 +33 dBm (class 4); DCS1800 +30 dBm (class 1); EDGE900 +27 dBm and EDGE1800 +26 dBm (class E2); TD-SCDMA/UMTS/CDMA-EVDO/LTE +23 dBm (class 3). |
| Receive sensitivity, as printed | 2G/3G <107 dBm (minus sign absent in source). LTE: B1 <-98; B3 <-95; B3 <-98; B40 <-98; B41 <-96; test bandwidth 10 MHz. Duplicate B3 and missing 2G/3G sign Confirmation required. |
Power
CM510-11X Series — Industrial cellular data transfer unit · Source revision not stated · Source p. 6
| Input | 7-32 V DC; reverse-polarity, overvoltage and overcurrent protection. |
|---|---|
| Standard adapter | 9 V DC / 1330 mA |
| Communication current | 60 mA at 12 V DC |
| Standby current | 25 mA at 12 V DC |
Mechanical / environment
CM510-11X Series — Industrial cellular data transfer unit · Source revision not stated · Source p. 6
| OS | Real-time OS in the specification table. |
|---|---|
| Enclosure | Metal; source IP41. |
| Body | 100 x 62 x 24 mm excluding antennas and fixtures; actual model governs. |
| Package | 298 x 226 x 60 mm; actual model governs. |
| Weight | 0.41 kg |
| Operating | -30 to +75 °C |
| Storage | -45 to +90 °C |
| Humidity | 95% RH, non-condensing. |
System connectivity
From field equipment to your system.
See how CM510-11X fits into your installation.
Illustrative connection architecture. External equipment and customer software are shown for context. Interfaces and options vary by configuration.
Downloads
Download PDF